4
g. Lift the handle or clips of the cleaner out from the pool.
2. Quick operation
a. Install the floating handle
*Adjust the tow rope according to
the swimming pool depth.
*Tie the floating handle to the cleaner
In the place indicated in the fig.
b. Install the swing plate
Insert the swing plate in the place
Indicated in the fig.
c. Connect the cleaner and home power with adapter and charging line to charge
the battery.
* Clean the charging port before charging.
* Red charging indicator light indicates the battery is charging.
* Green charging indicator light indicates charging is finished.
* Turn the switch knob to OFF before charging.
Adaptor indicator
Statut
Red
Charging
Green
Charging finished
d. Turn the switch knob to ON after putting it into water then the cleaner is power-on
and the indicator light is steady blue. The cleaner begins to work about 15
seconds later while the blue light flashes.
ON
OFF
