Audio Settings Menu
The Audio Settings Menu provides access to
the OrCam device’s settings by listening to a
menu of options and selecting the setting you
desire to change.
To enter the Audio Settings Menu:
1.
Press the Trigger button and the
Volume button simultaneously for two
seconds and then release. The device
will announce: "To enter the setup
menu press the Trigger button, press
either Volume button to cancel". Press
the Trigger button.
2.
Once you have entered the Audio
Settings Menu, you will hear: “Main
menu. To set reading rate press
Trigger, to change other settings press
the Volume buttons”.
3.
Press the Volume Up (protruding circle)
or Volume Down (indented circle)
buttons to move through the available
settings categories. The device will
announce the current setting category
Press the Trigger button to select the
desired category.
4.
When entering a category, the device
will announce the current setting of this
category. Follow the various
instructions.
5.
Once you have made a selection, the
device will announce "[This category]
set/changed to [the new setting]".
6.
Some options require the device to
enter Suspend Mode or to Restart in
order to take effect.
7.
Pressing the Trigger button and the
Volume simultaneously will return you
to the main menu, and from the main
menu exit the Audio Settings Menu.
Note:
If at any stage no button is pressed
for a period of six seconds, the device will
repeat the last announcement three times,
then exit the Audio Settings Menu.
