19
Start settings
When starting the WTU for the first time, the controller starts a program for setting
the following settings once:
Step 1Language ,
Step 2 Return air temperature set point
, Step 3 Time & date and
Step
4weekly schedule for setting normal and reduced ventilation.
The following applies to all programmes:
• Press OK to select a parameter.
• Use the up/down arrows to change the parameter.
• Press OK to confirm a changed parameter.
Step 1
Select the desired "Language".
Select language >
Dutch
Go to the next level by
clicking on the 'down'
arrow.
Step 2
Set the desired return air temperature (see the
Return air temp.
explanation 'Return air temperature' below).
Measured: ...°C
This is 21 °C as standard (log on to service level,
Desired: 21 °C
code 2222, to change default setting).
Step 3
Check that the correct time and date are
Time: ...
displayed. If this is not the case, you must use the
Date: ...
Change settings.
Weekday: ...
Step 4
Weekly schedule
Full speed
a.
Set the weekly schedule (Monday to Friday)
Monday -> Friday
with the periods when the WTU is at normal speed
Per. 1: 09:00 - 17:00
must be ventilated. There can be 2 periods per
day
Per. 2: 00:00 - 00:00
be set.
b.
Set the weekend and holiday schedule with the
Full speed
periods when the WTU is running at normal speed
Saturday ->Holiday
must be ventilated. There can be 2 periods per
day
Per. 1: 00:00 - 00:00
be set.
Per. 2: 00:00 - 00:00
Summary of Contents for WTU-1000-EC-E
Page 2: ...2...
Page 6: ...6 carried out...
Page 16: ...16 Note The connections shown in a box are optional Electrical Connections WTU EC E IE TA...
Page 41: ...40 Notes...