21
After refueling, please tighten the fuel cap and wipe the spilled fuel clean.
Move the fuel valve lever to the [OPEN] position.
Lock the brake stopper while stepping on the brake pedal.
If the shift lever is below the neutral [N] position, it will
return to the neutral [N] position.
Confirm the blade clutch lever is in the [OFF] position, and
the cutting height adjustment lever is pulled back all the
way up. The blade clutch lever is connected to the cutting
height adjustment lever only when the cutting height
adjustment lever is all the way in the up position. The
blade clutch lever will be moved back to the [OFF]
position if the cutting height adjustment lever is all the way
up.
After confirming that the shift lever is in the neutral [N]
position, pull the choke lever.
Place the throttle lever in the intermediate position;
between [LOW] and [HIGH].
Insert the key to the engine switch; the engine will be
started by turning the key from the [DRIVE] position to
the [START] position.
Release your hand from the ignition immediately after
the engine starts. It returns to the [DRIVE] position
automatically.
If the engine has been warmed up, this operation is not
needed.
Brake stopper
NOTICE
Brake pedal
START
OFF
ON
