36
Replace the fuel lines every season or as necessary. They cannot be dismantled or cleaned.
Please be careful of the direction of insertion when changing fuel lines. For more information,
please contact your dealer.
How to adjust tire pressure:
Check the tire pressure of the front and rear wheels according to the following table.
If the tire pressure is not equal on each side, the machine may veer to one side.
Tire size
Pressure
Front wheel
4.00-7
17.5 psi (120 kPa)
Rear wheel
17 x 8.00-8
23.2 psi (160 kPa)
How to clean engine coolant:
(1) Unscrew the 4 bolts that fixing the tank cover and
take off the cover.
(2) Remove mud or grass from the rotation screen before
each use.
(3) After cleaning, please put the engine cover and bolts
back to the original position.
For cleaning the engine coolant, it is easier to blow mud, grass and dust off with
compressed air to hold up the seat. (Please refer to the following ‘’How to adjust each
cable, belt and rod’’.)
Avoid using high pressure water washer. It may cause engine trouble.
At the same time, remove the grass that is piled on the edges of the HST fan cover. If
you keep using without removing grass, the HST oil temperature rises, so that the HST
will not operate at its optimum performance level.
Remove each part after the engine has cooled down. After cleaning, do not start the
engine until each part is installed.
If you keep working while grass is piled on the engine cooling system, it can cause
overheating, but also the engine temperature will increase and may cause a fire.
The rotating screen rotates with the engine. Please stay away from the rotating screen.
It may cause injury.
Rotation screen
