OREC RM60W
17
H
ANDLE
/
SEAT ADJUSTMENT
It is possible to adjust the handle in 3 position. And it is possible to adjust
the seat slide back and force.
Seat position(back and force)
Pull up the lever and select the seat position suitalble for operator.
Handle position(up and down)
Loosen the bolt, adjust the handle position, and fix it with bolt and U nut.
O
FFSET DECK OPEN
/
CLOSE
Offset cover is closed when it contacts obstable(tree, etc.). In case of
mowing along the obstacles, keep the offset cover contacted with
obstacles and drive straight. Figure in left side shows offset L, and it is
same way for offset R.
O
FFSET DECK OPEN
/
CLOSE MANUALLY
Offset lever enables to manually open/close the offset deck. Left lever
operate offset L, and right lever operate offset R. When lever is pulled,
offset will be closed. Offset lever is adjustable in 3 position(closed, half
open, and full open). Choose offset deck position suitable for the field.
CAUTION
1) Make sure if there is nobody between machine and offset deck, when offset deck is operated.
2) In case of mowing around the tree with offset blade cover(=option), do not drive faster than 2.0km/h, because
contacting point may be broken.
3) Pay attention not to place offset wing on the hill part to be lifted up, because blade belt may slip. When blade
belt slips with offset wing lifted up, disengage the blade clutch lever.
TIP :
Offset wing can mow up to 10 degee from main cutting deck. It is conveninet for mowing around the tree, which
is slightly hilly. Pay special attention for risk of thrown ojbect while offset wing is lifted up.
Fixing bolt
U nut
Offset blade cover
Obstacle
Driving
direction
Offset
open/close lever
MAX
MAX
MINI
MINI
