Auto-off
The learning PC will be automatically turned off after about 5 minutes of no input from the player.
Mouse Connection
Ensure the unit is turned OFF. Lift the mouse jack port cover at the back
of the unit and plug the mouse into the mouse jack.
To ensure the mouse is kept clean, keep it on a clean mouse pad.
Printer Connection
The printer port is located on the back of the unit.
If you wish to change the printer for a different model you must turn the
learning PC off to reset its printer configuration memory.
NOTE: When using the AC adaptor, connect the printer only after the learning PC is turned on.
Cleaning and Maintenance
The unit should be regularly examined for damage to the cord, plug, enclosure and other parts. In the event of
such damage, the unit must not be used with the adaptor until the damage has been repaired.
Always disconnect the power supply before cleaning.
Wipe the unit with a dry cloth.
Do not get the unit wet.
Do not dismantle the unit.
Cleaning the Mouse
Turn the round mouse-ball cover in a counter-clockwise direction and lift open the cover.
Take the ball out, wipe the ball and the inside of the mouse with a dry cloth to clean out all the dust.