Password Screen
Logging in
1. From the pull-down menu, select your name.
2. Enter your password in the Password field and press [ Enter ]. (If you have forgotten the password,
click on [ Hint ] to see your pre-entered clue).
Logging in as “Guest”
From the pull-down menu, select “Guest”, and press [ Enter ].
NOTE: Users who log in as "Guest" will not be able to save any information or access the Web Area.
Chapter 3
Chapter 3
Useful Features and Controls
Scroll Bar
To view continuing pages, click on the arrows at the bottom of the bar or press the down arrow key.
To view previous pages, click on the arrows at the top of the bar or press the up arrow key.
Demo
Press this key to see a demonstration of the exciting features and activities on your Accelerator Vision .
5
6
Cleaning and Maintenance
The unit should be regularly examined for damage to the cord, plug, enclosure and other parts.
In the event of such damage, the unit must not be used with the adaptor until the damage has been repaired.
• Do not dismantle the unit.
• Always disconnect the power supply before cleaning.
• Do not get the unit wet.
• Wipe the unit with a dry cloth.
Mouse Connection
1. Ensure that the unit is turned OFF.
2. Open the mouse jack cover on the back of the unit.
3. Plug the mouse into the mouse jack.
4. Turn the unit ON.
5. To prolong the life of the mouse, only use it on a clean mouse pad.
Starting the Accelerator Vision Learning PC
When you first turn on the Accelerator Vision you will be asked to do the following:
1. Click on the word “YourName”. You will be prompted to type in your name and then press [ Enter ].
NOTE: This should be the same name you use when you install the X-Cable software in your PC.
2. Enter a password and then press [ Enter ]. Do this again to confirm the password and then press [ Enter ].
3. Set the date and time and then press Enter.
4. Select your time zone and then press Enter.
Mouse Jack
