39
40
7. Press the Menu button
to move the highlight cursor along the function keys.
8. Press the Confirm button
when the desired function key is highlighted.
9. To delete one file, select the Delete-One icon and confirm by pressing
the Confirm button
.
10. Whilst in either mode, to change to the other, the AV cable must be
disconnected and step 1 through to step 4 should be followed.
XIII) Troubleshooting
There's no display
-Are the batteries properly installed?
-Do the batteries need replacing?
After the ATC3K is connected to my PC, it cannot find the new drive in
the, 'My Computer' folder
-Ensure each end of the ATC3K USB cable is properly and firmly
connected.
-Ensure your USB port is working properly. Try connecting another USB
device into the port. If the other device does not work, the USB port may
have a malfunction. In this case, contact your system manufacturer or
the manufacturer of your USB card.
I can't capture video footage
-Ensure there is enough space on the internal memory of ATC3K or the
SD card; the display will tell you how much time there is left for video
recording.
-Ensure the SD card is not locked. The letters “Err” will be displayed if
the SD card is locked.
The remaining time is not accurate
-The remaining time is an estimate.
-The remaining time depends not only on the time recorded, but on the
color density of the video footage. Under conditions with high contrast,
such as outdoors, the actual time available will be less than under
low-contrast conditions, such as indoors.
I can't play the video footage on my television
-Ensure each end of the AV cable is properly and firmly connected to
ATC3K and to your television.
-Ensure the ATC3K and television are both turned on.
-Ensure you have selected PB to view files.
Some captured video footage cannot be found when SD card is inserted
-The video footage may be stored on the internal memory. Connect the
ATC3K to your PC without an SD card, and it will show the files
in the internal memory.
Summary of Contents for ATC3K
Page 1: ......
