Oregon Scientific ATC3K, Owner'S Manual

I) Quick Start

Turning the Camera On

Press and hold the On/Off Button for 2 seconds (two beeping sounds). The LCD

screen will show the remaining time.

Taking Video Footage

1. Aim at what you want to record.

2. Press and hold the 'Movie shutter button' for 2 seconds to start recording (one

beeping sound). The time elapsed will be shown on the LCD screen.

3. Press and hold the 'Movie shutter button' again for 2 seconds to stop recording (two

beeping sounds). The length of the video footage will show on the LCD screen for 2

seconds, after which the remaining time will be shown (the remaining time is an

estimate only).

II) Camera Precautions

Notice the following guidelines when using your camera

• The ATC3K is shock resistant, not shock proof.

• For your safety, do not press the buttons on the camera during sports activities.

• Do not place the camera in areas prone to dust or damp for extended periods of time.

This may cause a fire or an electrical shock.

• Do not leave the camera in places exposed to extremely high temperatures, such as

under direct sunlight, for extended periods of time. This may affect the camera housing

and internal components.

• Clean the lens with a soft cloth to remove fingerprints or dust.

• We recommend using Alkaline batteries in temperatures between 32°F to 104°F (0°C

to 40°C). 

1

2

Disclaimer: 

Oregon Scientific will not, under any circumstances, be responsible for

injuries or property damage incurred during participation of any high-risk

sport/activity not endorsed or recommended by Oregon Scientific. Should the camera

malfunction under these circumstances, it would not be covered by the warranty. The

warranty will cover manufacturing defects.

Notes on copyright: 

Users are asked to note that the transfer of memory containing

photos or data protected under copyright laws is only permissible within the

restrictions imposed. Users assume all responsibility in the event that copyrights are

violated by the use of this camera.

Waterproof Feature

The ATC3K camera is waterproof up to 3m (10ft). Oregon Scientific will not assume
any responsibility for camera malfunction caused by liquid entering the camera as a
result of misuse by the user. 

• The working temperature range of a normal Alkaline AA battery is 32°F to 104°F (0°C

to 40°C). Above or below this temperature may cause the batteries to malfunction,

therefore for use in low temperature, we recommend changing to Lithium batteries.

• Turn the camera off before removing the batteries or memory card. The card and the

data may be damaged if the memory card is inserted or removed while the camera is

still on.

• Remove the batteries and memory card before storing the camera for long periods of

time. Keep it in a well-ventilated place to prevent mould.

• Under the following circumstances, have the camera repaired by qualified personnel:

a) The plug is damaged or worn.

b) The device has been dropped and/or the housing has been damaged.

c) Liquid has entered the camera.