Oregon Scientific ATC3K, Owner'S Manual

Precaution:

Follow the steps below to keep the camera waterproof.
Step 1: Apply silicon grease (included). 

Step 2: Ensure both o-rings are attached.

Step 3: Replace the cover.

Both o-rings need
silicon grease applied
to them. Follow the
instructions in Step 1.

Make sure the cover is
firmly closed.

3

4

Liquid may get inside the camera if the battery cover is not firmly

closed

• If the camera gets wet, wipe the liquid off as soon as possible with a dry cloth.
• Other camera accessories may not be waterproof.
• Ensure the o-rings are clean and have silicon grease applied before use underwater

or in wet conditions.

Using the camera in cold weather

• We recommend using Energizer e2 lithium batteries in cold weather.

Don't use the camera in extreme temperatures as this may cause the

camera to malfunction. 

Attention:

• Non-rechargeable batteries are not to be recharged; 
• Rechargeable batteries are to be removed from the camera before being charged; 
• Rechargeable batteries are only to be charged under adult supervision; 
• The supply terminals are not to be short-circuited; 
• Exhausted batteries are to be removed from the camera.

Take out the o-rings and use your
fingers to gently rub on a thin layer
of silicon grease onto the surface of
the o-rings. The silicon grease needs
to be applied on the o-rings evenly.