11
GB
If you wish to disable the auto-reception feature, press the [
]
button for three seconds. The radio reception signal [ ] will
disappear. The unit will not respond to radio signals.
To enable the feature again, press the [
] button for three seconds.
The radio reception signal [ ] will start blinking to initiate
reception automatically.
HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold [MODE/SET] for three seconds. The
hour digits will blink.
Press [
] or [
] select the hour. Keep pressing the button to
increase or decrease the value rapidly.
Press [MODE/SET] to confirm. The minute digits will blink.
Repeat the same procedure to set the minutes, hour, current date,
month, display language, day-of-week and offset for the alternate
time zone.
Note: The time and date are displayed in 24-HOUR clock format.
For the language display, you can choose among English (E), German
(D), French (F) and Italian (I). Day-of-week is in the usual sequence
of Monday through Sunday.
For the alternate time zone, which is indicated by the ZONE icon,
enter the hour offset using the [
] and [
] buttons and the
BAR112HG will calculate the second time accordingly.
If there is an item you do not wish to change, simply press [MODE/
SET] to bypass the item.
When you are done, press [MODE/SET] to exit. The display will
return to the mode last chosen.
HOW TO SET AND ARM THE ALARMS
The BAR112HG has two alarms, ALARM 1 and ALARM 2. They
can be invoked together or independently.
To set an alarm:
1.
Press [
] once to select ALARM 1 or again to select ALARM
2
the last selected time of the alarm will be displayed. If you have
never set the alarm before, the time will be displayed as 0:00.
2. Press [
] for three seconds. The hour digits will blink.
3. Enter the hour using [
] and [
].
4. Press [
]. The minute digits will blink.
5. Enter the minutes using [
] and [
].
6. Press [
] to exit. The [
] icon for the alarm chosen will be
displayed indicating the alarm set above is now armed.
You can also arm or disarm an alarm by pressing the [AL ON/OFF]
button.
When an alarm is armed, it will go off at the set time.
The four-step crescendo function allows the alarm to start off gently
and step up its intensity every 20 seconds for four times. Without
interruption, the alarm will go off for a total of two minutes. If no key
is pressed to turn off the alarm within these 2 minutes, the alarm will
go off again after 8 minutes.
If a second alarm goes off when the first alarm is sounding off, the first
alarm will be disabled automatically.
