E
N
5
For best results:
• Place the sensor within 30 m (100 ft) of the main
unit.
• Place the sensor out of direct sunlight and
moisture.
• Position the sensor so that it faces the main unit,
minimizing obstructions such as doors, walls and
furniture.
• Place the sensor in a location with a clear view to
the sky, away from metallic / electronic objects.
• Position the sensor close to the main unit during
cold winter months as below-freezing temperatures
may affect battery performance and signal
transmission.
TIP
The transmission range may vary depending
on many factors. You may need to experiment with
various locations to get the best results.
NOTE
Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures
below freezing.
CLOCK
CLOCK RECEPTION
This product is designed to synchronize its clock
automatically with a clock signal received from
provided remote sensor.
To enable / disable signal reception:
Press and hold
to enable or
to disable signal
reception.
NOTE
Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.
Clock signal reception indicator:
STRONG SIGNAL
WEAK / NO SIGNAL
NOTE
Clock reception is dependent on the successful
transmission of data from remote sensor. If
is
displayed, press
RESET
on sensor and press
and
on the main unit and ensure sensor
has been
successfully logged.
BAR339DP_M_EN_R6.indd 5
6/18/08 12:31:03 PM
All manuals and user guides at all-guides.com
all-guides.com
