EN
12
To force a manual search for RF clock
reception, press and hold
SEARCH
on the sensor
(RTGR328N) for 2 seconds.
TURN RADIO-CONTROLLED CLOCK ON / OFF
If you wish to manually set the clock, you must first
disable the radio-controlled feature. To do this, navigate
to the Clock / Alarm Area. Then, press and hold on
the main unit for 2 seconds. To enable it, navigate to the
Clock / Alarm Area, then press and hold for 2 seconds.
RF clock enabled:
RF clock disabled:
SET CLOCK
You only need to do this if you have disabled the radio-
controlled clock, or if you are too far from a RF signal.
NOTE
1. Press
MODE
to navigate to the Clock Area.
will
show next to the Area.
2. Press and hold
MODE
for 2 seconds.
3. Select the time zone offset hour (+ / -23 hours), 12 /
24 hour format, hour, minute, year, date / month
format, month, date and display language.
4. Press or to change the setting.
5. Press
MODE
to confirm.
The language options are (E) English, (F)
French, (D) German, (I) Italian, and (S) Spanish. The
language you select determines the weekday display.
SWITCH CLOCK DISPLAY
Press
MODE
to navigate to the Clock Area.
will show
next to the Area.
Press or to toggle between:
•
Clock with seconds
•
Clock with day
•
Clock with time-zone offset
•
Calendar
NOTE
BAR826HG_UM_EN.P65
2005.3.8, 11:21 AM
12
P/N:086-003808-011 REV1
13/162
