14
EN
TEMPERATURE AND HUMIDITY
The weather station can display the following information
from any of the 5 remote sensors:
•
Current, minimum, and maximum temperatures
and relative humidity percentages.
•
Heat index that shows the apparent, or felt, current
temperature, trend line, and minimum / maximum
readings.
•
Comfort level indicator and trend line (rising, falling,
or steady).
Data is collected and displayed every 60 seconds.
VIEW TEMPERATURE AND HUMIDITY AREA
Press SELECT to navigate to the Temperature and Humidity
Areas.
Temperature and Heat Index
data is given at the top;
Humidity is below.
SELECT MEASUREMENT UNIT
Press
°
C /
°
F on the back of the weather station.
SELECT SENSOR CHANNEL
Press CHANNEL to switch between sensors 1 - 5.
The house icon shows the
selected remote sensor.
To auto-scan between sensors, press and hold CHANNEL
for 2 seconds. Each sensor’s data will be displayed for
3 seconds.To end auto-scan, press CHANNEL or MEMORY
with the Temperature / Humidity Area selected.
If you select a sensor that collects only temperature
data, the humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
Press MEMORY repeatedly to
view current, maximum and
minimum records for the selected
sensor. To clear the records, press
and hold MEMORY for 2 seconds.
A beep will sound to confirm that the memory has been
cleared.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the Temperature and
Humidity readings.
Trend
Rising
Steady
Falling
ICON
NOTE
