GB
7
Problem
Symptom
Remedy
Problem
Symptom
Remedy
Error
message:
“OL” shows
on the scale
display
The scale is
overloaded.
Maximum
weight is
150 kg / 330 lb
/ 23st-8lb
Step off the
scale and try
again with
less weight
( 3).
"---" shows
on the
remote unit
where height
should show
Height has
not been
entered for
the selected
user profile
Input height
data, then
repeat the
measurement
( 3).
"---" shows
on the
remote unit
where BMI
should show
BMI
calculation is
out of range
Check the
height ( 3).
Wrong user
profile
selected
Check the
user profile
( 3).
"---" shows on
the remote
unit where
weight should
show, and
is flashing
The remote
unit is not set
up to receive
data from the
scale
Set up the
remote unit
with the scale
( 3, Getting
Started, Steps
6 - 7).
Height
(cannot
enter)
Remote unit
batteries are
low
Replace the
batteries in the
remote unit
( 4).
Memory
does not
work
Guest profile
was selected
(you cannot
store records
to memory
for guests)
Select
another user
profile, then try
again
( 3).
The record
was
accidentally
saved to
another user
memory
Select
another user
profile, then
try again.
( 3)
User profile
was not
selected
within
30 seconds
of stepping
on the scale
Try again.
The user
profile must
be selected,
and
must be
pressed for
2 seconds
within
30 seconds of
taking a
measurement.
Weight does
not match
between
remote unit
and scale
Measurement
units do not
match
Check the
measurement
units ( 3).
Weight is not
accurate
Scale is
uneven or on
carpet
Use the carpet
feet or try
using the scale
on a flat
surface
( 3, Getting
Started,
Step 4).
Remote unit
suddenly
switches into
clock mode
Display has
timed-out
Press
to
switch back to
the user
profile mode.
was
not pressed
long enough
Try again.
The user
profile must be
selected, and
must
be pressed
and held for
2 seconds
within
30 seconds of
taking a
measurement.
Remote unit
is too far
from scale,
or there are
too many
obstructions
Move the
remote unit
within
8 meters of
the scale, with
minimal
obstructions.
SPECIFICATIONS
Dimensions:
Scale W x H x L
290 x 310 x 38 mm
Scale weight
1.2 kg
(without batteries)
Remote unit W x H x L
137 x 86 x 30 mm
Remote unit weight
180 g
(without batteries)
Weight measuring range:
Weighing mechanism
strain gauge
mechanism
Weight units
kilogram (kg) /
pounds (lb) / stone
pounds (st-lb)
Maximum weight
150kg / 330 lb /
23st-8lb
Graduation
0.1 kg / 0.2 lb
BWR 102 new English r8 op
12/27/03, 10:25 AM
7
Black
