EN
13
Why is the player not playing CDs?
The player's lid may not be closed properly or may be
raised slightly when LR6, AA, UM-3 batteries are inserted
in the battery compartment. Ensure the disc is secured
in place, changing to the right type of batteries if
necessary.
The player may not be properly inserted into the Speaker
Dock. Reinsert the player, making sure it makes contact
with the 12-pin connector in the Speaker Dock's slot-in
mechanism.
The disc may be dirty. Clean it with a soft, lint-free cloth
and try playing the disc again. If it still does not play, this
may mean it is scratched or is not of the CDDA format
that is compatible with the player.
There may be excess moisture condensed inside the
player's lens, or on the 12-pin connector. Leave the
player turned off for a few hours until moisture
evaporates, then turn on.
The player is powered on but why is the player or
Speaker Dock emitting noisy background? Or why
is no sound being emitted at all?
Your headphones may be defected, or the volume level
on the external audio system or Speaker Dock may be
too low. Check to see that the headphones and the line
remote plugs have been inserted as far as they will go.
Data signal interference or static electricity may disrupt
the signal reception from the audio source. Power off
the player or Speaker Dock, wait a few seconds, and
turn the unit back on. Make sure the unit is not near any
mobile phones, TVs or tuners.
The external speakers of the Speaker Dock may be dirty
or damaged. Have the unit serviced by a qualified
Oregon Scientific dealer.
Why is the player or Speaker Dock not responding
when the buttons are pressed?
Check that the player or the line remote is in not in
HOLD
mode. Keep in mind that the HOLD function for both
devices work independently of one another. While the
HOLD function is actively turned on for the player but is
not actively turned on for the line remote, you will be
able to control the player functions from the line remote.
Remove and reconnect the AC power plug or reinsert
new batteries and switch the player and / or Speaker
Dock on again, checking that the power is on. If there is
still no response, the buttons on the player, line remote
or Speaker Dock may be damaged. Take the unit to a
qualified Oregon Scientific dealer for servicing.
Why does the disc not play starting with the first
track?
The random play mode may be turned on. Ensure this
option is turned off.
EQUALIZER
The player is equipped with a 5-band equalizer that
allows you to experiment with different sound options
depending on the kind of music being played back.
Repeatedly press the button on the line remote or
EQ
button on the Speaker Dock to toggle between the
different sound options shown on the display: Normal
(default), Classic, Pop, Jazz and Rock.
The last option chosen is automatically saved for
playback until a new option is selected.
USING THE PLAYER WITH AN AUDIO
SYSTEM
Using a stereo connection cable (not supplied), you can
listen to CDs being played on the player through an audio
system.
1. Turn off the player and your audio system before
connection.
2. Connect the stereo connection cable from the line-
out jack on the unit to the audio-in jack on the audio
system.
3. Use your player as normal. Since audio is broadcast
through the audio system's speakers, ensure that
volume level on your audio system is set to an
acceptable level.
When the player is connected to an audio
system, it cannot be docked into the Speaker Dock.
TROUBLESHOOTING
Use this troubleshooting guide to help you remedy any
difficulties you may be experiencing while using the
player or Speaker Dock. Should any problem persist after
you have checked these symptoms, consult your nearest
Oregon Scientific dealer.
Why does the unit not power on at all or the power
keeps turning off after turning on?
The plugs and jacks may be dirty, affecting the
connections. Ensure the AC adaptor is cleaned and
plugged into the power outlet and other connections are
firmly established.
The rechargeable or AA batteries in the player may have
run out of power or are not correctly aligned with their
polarity. Re-install batteries checking the polarity; if the
unit still does not operate, insert new batteries into the
unit.
NOTE
ICON
REPEAT
PATTERN
BUTTON
PRESS
DESCRIPTION
--
MODE
4x
Repeat /
Random off.
--
DDM328 Eng R9 OP
5/9/05, 10:02 AM
13
All manuals and user guides at all-guides.com
