12
Operating System
Windows XP/Vista/Windows 7 or above
Mac 9.x or X.x
CPU
Pentium II or above
RAM
At least 64MB
Interface
USB port
CD
4x speed CD ROM or above
Problem
Cause
Solution
Cannot turn on the
camera by pressing
the “power” button.
Low battery power.
Battery placed at
wrong polarities.
Replace or install the battery
correctly.
Photos can not be
saved when taking
pictures.
The memory card or
built-in memory
hasn’t been formatted
properly.
Format the memory in SETUP
mode of the camera. Please
refer to section 5.3.
Cannot find
removable disk after
connecting the
camera to the
computer
.
1. Connection failure.
2. The mode of the
camera is not set to
removable disk
properly
1. Make sure all cable
connections are secured and
restart the computer if
necessary.
2. Set the camera to removable
disk mode, refer to section 6.3.1
(system setting, USB
connection).
Flash does not work. Battery Power is too
low.
Replace with new ALKALINE
battery.
The batteries used
up very fast.
Use wrong type of
battery.
Replace with new ALKALINE
battery.
System requirement
Trouble shooting
EN
