6
PAL
European video format.
USB
PC Cam
Work as a web camera.
Disk Drive
Act as a portable disk.
1. Open the battery door.
2. Insert 2 AAA alkaline batteries into the camera.
3. Turn on the camera.
Press the POWER button to turn it on (press it again to turn off).
This camera has built-in internal memory. This memory can be extended with a
SD memory card (not included).
Follow the instructions given below to insert the optional SD memory card into the
camera.
1. Turn off the camera first.
2. Insert the SD card into the camera.
Note:
There is only one right direction to insert the SD memory card into the slot.
Do not force the card into the slot, or else it may damage both the camera
and the SD memory card.
Note:
The SD memory card must be formatted before taking photographs. See
the following sections for more information.
1. Press Menu button
2. Select Setup setting by right key.
3. Press OK to confirm and select by up or down key.
4. Press OK to format the card or memory.
The camera can be set to different resolutions.
1. Press MENU to set proper resolution.
Resolution: VGA(640X480) , 1.3M(1280x960) , 3.1M (2048X1536),
5M (2560 x 1920), 8M (3264x2448), 12M (4032x3024)
2. Six different resolutions will be displayed. Select the desired resolution by
Using the camera
Installing the batteries
Inserting a memory card (not included)
Formatting the memory or SD card
Setting the resolution
EN
