EN
NOTE:
When capturing videos, once the
SHUTTER RELEASE
button
is pressed and recording starts, zooming cannot be further adjusted
for the duration of the recording.
USING THE SELF-TIMER
The Self-Timer function counts down from 10 seconds before the
camera automatically takes a picture by itself. This is useful when you
want to be in the picture and there is no one else to press the
SHUTTER
RELEASE
button.
To activate the Self Timer:
1. Press
to activate the Self-Timer function. The Self-Timer
icon appears on the LCD.
TIP:
If you wish to cancel the Self-Timer function at this stage,
press
again and the
icon disappears from the LCD.
2. Press the
SHUTTER RELEASE
button. The Self-Timer LED
starts blinking. The camera starts counting down from
10 seconds until the photo is automatically taken. The Self-Timer
then automatically disables.
9
Battery Level
Indicator
Current Date
Resolution
ISO Setting
Capture Mode
Flash Icon
White Balance
Quality
Number of Photos
Available to Take
Current Time
Number of Photos Taken
Zoom Level
Memory Type
DS9810 EngManl R3 (V2.0) OP
1/7/05, 4:00 PM
10
¶´ƒ
