EN
4
13. / : alarm 1 or 2 enabled
GETTING STARTED
POWER SUPPLy
Adaptor
The adaptor powers the unit. Plug adaptor into socket
making sure the adaptor is not obstructed and is easily
accessible to the unit.
NOTE
• To completely disconnect from power, the adaptor should
be disconnected from the mains.
• The main unit and adaptor should not be exposed to
wet conditions. No objects filled with liquid, such as
vases, should be placed on the main unit and adaptor.
Insert batteries (for memory back-up only):
1. Remove the battery compartment cover.
2. Insert the batteries, matching the polarities.
3. Press
RESET
after each battery change.
NOTE
Batteries should not be exposed to excessive heat
such as sunshine or fire.
CLOCk
CLOCk RECEPTION
When brought within range of a clock signal, this product is
designed to synchronize its clock automatically.
EW103U:
Slide
Uk / EU
switch to select closest signal.
• UK: MSF-60 signal: within 1500km (932 miles) of
Anthorn, England.
• EU: DCF-77 signal: within 1500km (932 miles) of
Frankfurt, Germany.
EW103A:
• US: WWVB-60 signal: within 3200km (2000 miles) of
Fort Collins, Colorado.
To search for signal reception:
Press
RCC
.
Reception takes 2-10 minutes. If the signal is weak, it can
take up to 24 hours to get a valid signal.
Clock reception indicator:
No signal
Weak signal
Strong signal
In some cases, you may not receive the signal immediately.
