20
EN
1. Simultaneously press
FUNC / SET
and
MODE
.
2. The TOUR number will display. The percentage (%)
at the top indicates the total used memory.
3. Press and hold
FUNC / SET
for two seconds. This
ENDS the TOUR recording session.
4. Press
MODE
to return to the clock display.
CLEAR ALL TOUR MEMORIES
For best results, perform these steps after you download
TOUR information to the PC software.
Either:
1. Download the information to your PC (the TOUR will
be automatically cleared).
Or:
1. Deactivate the TOUR Mode. With the END screen
shown, press the
FUNC/SET
button. CLR shows at
the bottom of the display.
2. Press and hold
FUNC/ SET
until donE shows at the
bottom of the display.
3. Press
FUNC/SET
again to display 0% and confirm all
data has been cleared.
4. Press
MODE
to return to the CLOCK display.
PC KIT (OPTIONAL ITEM - SOLD SEPARATELY)
The watch is compatible with a PC Kit that includes a
USB connector cable and CD-ROM for downloading
information to a personal computer.
Full instructions for using the software are provided in
the help menu and can be viewed once you have installed
the CD-ROM.
NOTE
The PC Kit for the RA103 / RA183 series
Outbreaker watch is sold separately. Contact the retailer
or our website (www.oregonscientific.com) for more
information about the AD103 PC Kit.
The PC Kit enables you to store and recall most of the
information that is collected by the Outbreaker watch.
This allows you to free up the watch memory for recording
more information, while preserving the training records
that are most important to you. For example, with the PC
Kit you can specify which information you want to record
in TOUR Mode: By limiting what is recorded, you can
keep longer records. This can be useful if you wish to
monitor your performance during an extended period such
as a two-day hike, where only temperature, pressure and
altitude are of concern, and vertical variance is important
to you. Full details of the watch’s memory capacity are
given in the TOUR MEMORY section.
You can also use the PC Hook-up Kit to set values on the
watch through the PC. A full list of options is given at the
end of this section.
RA103&RA183_EN_023.p65
11/3/05, 12:33 PM
20
