9
EN
TURN THE ALARM SOUND OFF
The alarm will sound for 1 minute. Press any key to turn
the alarm sound OFF. The alarm will automatically reset
itself unless you deactivate it.
ACTIVATE / DEACTIVATE THE ALARM
Press
MODE
to navigate to Clock Mode. Press
SET
, then
press
+
to activate or deactivate the alarm. shows when
the alarm is activated.
USING THE ALTIMETER-BAROMETER
ABOUT THE ALTIMETER-BAROMETER
The watch is equipped with an intelligent barometer that
determines altitude by the built-in sensor with the advanced
Baro-compensation technology. The sensor can also
distinguish the differences between pressure caused by the
changes in physical altitudes and pressure caused by weather
conditions. This smart distinction eliminates discrepancies
and makes the altimeter reading more accurate than most of
the average devices available on the market.
The altimeter measures altitude in either metres or feet
and can store and recall the:
•
Maximum / minimum altitudes attained during your trip
•
Total accumulated maximum / minimum altitudes
attained during your trip
•
Maximum ascending / maximum descending speeds
Current vertical speed
•
Maximum / minimum altitude alert (sounds an alarm
when exceeded)
SET THE ALTITUDE
To set the altitude:
1. Press
MODE
to switch to Alti-Baro
Mode.
2. Press and hold
SET
until the first
setting flashes.
3. Press
+
or
-
to change the setting,
or press and hold to speed through
the options. Press
SET
to confirm
the setting.
To effectively set the altimeter you need to know the
correct altitude. To do this:
•
Obtain a topographical map; find your location and
its related altitude reading.
OR
•
Set the sea level pressure on your watch.
RA103&RA183_EN_023.p65
11/3/05, 12:33 PM
9
