9
GB
HOW TO SET THE ZONE TIME
Zone time can be set in the sequence of setting the calendar clock.
1. Press and hold the SET for two seconds in either clock-date or
clock-second display to enter the calendar clock setting mode.
2. Press SET to toggle to the zone time the setting mode.
3. Press +/- to tune forward or backward the zone hour.
4. Press SET to confirm the setting and toggle to next field and
then quit the setting mode.
Refer to Fig. 3a to set the zone time.
Note:
• Zone hour can be set within a range of +/- 23 hour.
HOW TO SET THE UNIT OF MEASUREMENT
RA201 is equipped with two sets of unit of measurement: metric or
imperial. It can be set in the sequence of setting the calendar clock.
1. Press and hold the SET for two seconds in either clock-date or
clock-second display to enter the calendar clock setting mode.
2. Press SET to toggle to the unit of measurement setting mode.
3. Press +/- to select the unit of measurement.
4. Press SET to confirm the setting and quit the setting mode.
Refer to Fig. 3b to set the unit of measurement.
Notes:
a) Metric unit set in
O
C, m & hPa; Imperial unit set in
O
F, ft & inHg.
b) Press and hold +/- function is not available for selecting the unit
of measurement.
HOW TO SET THE DAILY ALARM
1. a) Press LAP/- to toggle the daily alarm on/off in clock-alarm
display.
b) Press and hold SET for two seconds in clock-alarm display to
enter the alarm time setting mode.
2. Press SET to toggle between the hour and minute setting.
3. Press +/- to increase or decrease the values.
4. Press SET to confirm the setting and toggle to next field and
then quit the setting mode.
Refer to Fig. 3c to set daily alarm.
Alarm on/off
Set hour
Set minute
SET
Fig.3c
SET
SET
-
+
-
+
-
Fig. 3c
