3
GB
3. Replace the battery compartment door.
Under normal circumstances, the batteries are good for
1 year. However, the battery life can be reduced vastly
by frequent use of the backlight, projector and snooze
function.
Replace the batteries when Low battery indicator appears
on the the LCD display.
HOW TO USE THE PROJECTOR
1. Keep pressing the
SNOOZE
BUTTON. The backlight
and projector will turn on.
2. Adjust the angle of the projector for a good projection on
the wall or ceiling.
3. Use the FOCUS KNOB to adjust the focus of the
projection.
After the projector is adjusted, to use the projector,
simply press the
SNOOZE
BUTTON once. The projector
will come on for five seconds before automatically switch-
ing off.
HOW TO USE THE PROJECTOR
POWER ADAPTER
Your unit comes with a power adapter so you can use the
projector for extended period of time.
To install the adapter :
1. Slide open the battery compartment.
2. Plug the adapter into the adapter socket.
3. Replace the battery compartment door.
4. Making sure the voltage is correct, plug the other end of
the power adapter into a free wall socket.
Once the power adapter is in place, you can select to turn on
the projector for a longer period of time, such as throughout
the night, by sliding out the LIGHT ON SWITCH on the
back of the unit. To turn off the projector, slide the switch
back.
Note that this switch can only be used with the power adapter
installed. For momentary projection, use the
SNOOZE
BUTTON.
HOW TO USE THE BACKLIGHT
Press the
SNOOZE
BUTTON once. The backlight will
turn
on
for
8
seconds.
