6
GB
interruption, the alarm will go off for a total of
2
minutes.
If a
second
alarm goes off
during the first alarm,
the first alarm
will be disabled automatically.
HOW TO STOP AN ALARM
Pressing
SNOOZE
during an alarm will invoke the SNOOZE
FUNCTION, which will stop the alarm and let it sound off
again after
8
minutes.
To stop an alarm from ringing on the same day, press
[
] or [
] once. Note that the alarm is still
armed and will go off at the set time the following day.
To deactivate the alarm function completely, press
[
] a second time.
HOW TO RESET THE UNIT
There is a RESET BUTTON embedded into the battery
compartment. It allows you to return all settings to its
factory values.
To use the RESET BUTTON :
1. Slide open the battery compartment.
2. Use a blunt stylus to press the RESET BUTTON once.
HOW TO SET AND ARM THE
ALARMS
The
RM338SP
has
2
alarms, ALARM 1 and ALARM 2.
They can be invoked together or independently.
To set an alarm :
1. Press [
] once to select ALARM 1 or again to
select ALARM 2. The last selected time of the alarm will
be displayed. If you have never set the alarm before, the
time will be displayed as 0:00.
2. Press [
] for
3
seconds. The hour digits will
blink.
3. Enter the hour using [
] and [
] .
4. Press [
] . The minute digits will blink.
5. Enter the minutes using [
] and [
] .
6. Press [
] to exit. The ALARM ON ICON for
the alarm chosen will be displayed indicating the
alarm set above is now armed.
You can also arm or disarm an alarm by pressing the
[
] BUTTON.
When an alarm is armed, it will go off at the set time. The
display will light up for 10 seconds with the ALARM
ICON flashing.
The
4
-step crescendo function allows the alarm to start off
gently and step up its intensity every 20
seconds
. Without