3
GB
When the low battery indicator [ ] is shown on the display,
replace with fresh batteries.
Note: Under normal circumstances, the batteries are good for 1
year. However, the battery life can be reduced vastly by frequent
use of the projector or snooze function.
If not disposed of properly batteries can be harmful.
Protect the environment by taking exhausted batteries
to authorized disposal stations.
MOMENTARY PROJECTION FEATURE
Press [
SNOOZE
] and the projection will be activated for
approximately 5 seconds.
Note: Make sure the [
PROJECTION ON
] switch is switched to the
front i.e. it is in the “Off” position.
CONTINUOUS PROJECTION FEATURE
WITH POWER ADAPTER
RM813PA comes with an AC power adapter. Use of the AC power
adapter is required for continuous time projection.
To install the adapter:
1. Insert adapter into the jack at the bottom of the unit.
2. Plug the adapter into an electrical wall outlet.
Note: Make sure the voltage is correct.
Once the power adapter is in place, you can select to turn on the
projector for longer time (such as throughout the night) by sliding
the [
PROJECTION ON
]
switch (located on the side of the unit) to
the back i.e. it is in the “On” position. To turn off the projector, slide
the switch to the front to the “Off” position.
Note that this switch can only be used with the power
adapter. For momentary projection, use the [
SNOOZE
].
