5
GB
for day-of-week. For the day of the week language you can
select among English (E), French (F) or Spanish (S).
Day-of-the-week
Language
Monday
Tuesday
Wed.
Thursday
Friday Saturday S u n d a y
English
French
Spanish
To toggle among the 4 U.S. time-zones, press [ZONE] button to
display Pacific, Mountain, Central or Eastern.
HOW TO SET THE ALARM
This unit is equipped with a daily alarm.
To set and activate the alarm:
1. Display the alarm time by pressing [
] .
2. Press and hold [
] for 2 seconds. The hours digits will flash.
3. Enter the values by [
] buttons.
4. Confirm the entry by pressing [
] .
5. The minutes digits will flash.
6. Repeat (3) and (4) to finish the setting. The alarm will be
activated automatically.
To deactivate the alarm:
1. Press [
ON/OFF
] to deactivate the Alarm. [
] will
disappear when the alarm is being deactivated.
2. Press [
ON/OFF
] to activate the alarm again.
CRESCENDO ALARM AND
SNOOZE FUNCTION
When the alarm goes off at the preset time, the projection will be
turned on for 8 seconds. The [
] icon will be flashing and the
alarm sound will be turned on.
The crescendo alarm function allows the alarm sound to start off
gently with step-up intensity. Without interruption, the alarm will
be on for 2 minutes.
To stop the alarm, press [
], [
ON/OFF
] or [SNOOZE]. If
[
ON/OFF
] is pressed, the alarm will be turned off permanently.
If [
] is pressed, the alarm will be turned off and be activated
again after 24-hours. If [SNOOZE] button is pressed, the alarm
sound will be turned off temporarily and the snooze function will
be activated. The alarm will go off again after approx. 8 minutes
until other key is pressed to turn off the alarm.
RESETTING THE UNIT
In case of malfunction or abnormal display, press the [RESET]
button at the bottom of the unit wth a blunt stylus. All settings will
be cleared and reset to their default values.
