EN
13
The animation feature will move the image of
the time, alarm on/off status and alarm time in a
cascading and random motion, which is pleasant to the
eye.
To flip the projected time upside down:
1. Press the
SNOOZE / LIGHT
button.
2. While the projector is on, press the
SNOOZE / LIGHT
button again to flip the time.
3. To flip again, press the
SNOOZE / LIGHT
button
again, etc.
THE VIBRATING DEVICE (OPTIONAL)
The vibrating wake-up device receives a signal from the
main unit and performs a wake-up function by vibrating.
It is designed to go under your pillow. You can purchase
the device separately.
NOTE
The device has a range of roughly
50 feet
and has an
LED meter to show data transmission and battery
level.
The light on the vibration device will flash in red when
the battery is low, and the light will flash in green when
the battery power is full.
The switch within the vibrating device can adjust to
alarm 1 or alarm 2, or both. Simply select the alarm time
when you want the device to wake you up.
The vibrating device is powered by two "AA"
1.5V alkaline batteries (included). It is also compatible
with rechargeable batteries (not included).
THE BACKLIGHT
The user can press the
SNOOZE / LIGHT
button at the
base of the unit to enable the backlight function and the
backlight will be turned on and last for 5 seconds.
THE RESET HOLE
If the clock behaves strangely or stops responding, insert
and press a blunt stylus into the clock's Reset Hole. (This
is located on the back of the clock. Simply insert a blunt
stylus to reset the unit's settings).
NOTE
RM818PA English R1
9/1/04, 11:20 AM
13
