background image

4

GB

Note: Make sure the 

 

PROJECTION ON 

switch is switched to the

back.

HOW TO USE THE PROJECTOR

WITH POWER ADAPTER

RM868P/RM868PU comes with an AC power adapter. Use of the
AC power adapter is required for continuous projection.

Once the power adapter is in place, you can select to turn on the
projector for longer time (such as throughout the night) by sliding

the [ 

 

PROJECTION ON 

switch on. To turn off the projector, slide

the switch back.

If you have press 

SNOOZE 

to change the projected image to

Alarm time with its on/off status when projection is on, please note
that the projected image will return to Current time with Alarm-on/
off status automatically after 10 seconds.

Note that this switch can only be used with the power
adapter installed. For momentary projection, use the

SNOOZE 

].

SECTION  2   THE CALENDAR CLOCK

DIGITAL & ANALOG DISPLAY MODES

Press [MODE/SET] to display the following in sequence:

Digital

Analog

1) Current Time with Second

------------------------------------

Calendar

Projector Features

    Feature

           Effect

            Instructions

Adjustable

Rotates the

Tilt swivel projection to alter

Projector

projection 180°

the direction of projection

FOCUS

Focuses projection

Rotate to focus projection

Knob

 ] IMAGE

Rotates projection

Rotation of projection allows

ROTATION

user to place clock in

knob

convenient

180°

Horizontally  flips

Flips an image to maintain

ROTATION

the projection 180°

an upright position

button

Summary of Contents for RM868P










Reviews: