background image

6

EN

SNOOZE

Press SNOOZE/LIGHT to temporarily disable the alarm for 8
minutes. The alarm icon will blink while Snooze is activated.

TO TURN THE ALARM OFF OR ON

Press ALARM, MODEMEMUP, or DOWN.

To turn the alarm off completely (deactivate it for the next
day), press ALARM until the icon disappears.

TEMPERATURE

This product measures current indoor temperature.

VIEW MIN / MAX / CURRENT MEASUREMENTS

Press MEMORY.

CLEAR MIN / MAX MEASUREMENTS

Press and hold MEMORY for 2 seconds until a beep sounds.

BACKLIGHT

Press  SNOOZE/LIGHT to illuminate the backlight for 5
seconds.

PROJECTOR

This product has a built-in projector for viewing the time.

 The maximum projection range is 2 meters (6 feet).

The image gets larger the farther you display it.

PROJECT THE TIME

In a darkened room, press SNOOZE/LIGHT to display the
time for 5 seconds.

MOVE IMAGE

Adjust the projector arm.

FLIP IMAGE

Press the 180° Rotation button while the projector is on.

ROTATE IMAGE

The ROTATION knob is located on the back of the projector.
Rotate to adjust.

FOCUS IMAGE

The  FOCUS knob is located on the back of the projector.
Rotate to adjust.

Summary of Contents for RM988P










Reviews: