5
EN
4. The setting order is: time zone offset, 12/24-hr
format, hour, minute, year, day / month format,
month, day and language.
NOTE
Time zone offset sets the clock +/- 23 hours
from the received clock signal time.
NOTE
The language options are (E) English, (F) French,
(D) German, (I) Italian, and (S) Spanish.
To select display mode:
Press
CLOCK
to choose between clock with seconds
and clock with weekday.
ALARM
To set the alarm:
1. Press and hold
ALARM
for 2 seconds to enter
alarm-setting mode.
2. Press
/
to set hour / minute.
3. Press
ALARM
to confi rm. indicates alarm is ON.
To toggle alarms ON / OFF:
1. Press
ALARM
to display alarm time.
2. Press
ALARM
again to turn alarm ON / OFF.
To silence the alarms:
• Press
SNOOZE
to silence it for 8 minutes
OR
• Press any other key to turn the alarm off and activate
it again after 24 hours.
TEMPERATURE
To toggle temperature unit:
Press
°C / °F
.
To toggle between outdoor / indoor sensor readings:
Press
TEMP
.
/
indicates indoor and outdoor
temperature.
To auto-scan between sensors:
Press and hold
TEMP
for 2 seconds to display the
sensor’s data for 5 seconds.
To deactivate auto-scan function press
TEMP
.
PROJECTOR AND BACKLIGHT
To activate Projection function:
• Slide
PROJECTION
switch to
ON
to illuminate
projection continuously.
To activate Backlight function:
• Slide
LIGHT
switch to
ON
to illuminate backlight
continuously.
OR
• Press
SNOOZE
to turn on projector and backlight
for 5 seconds.
• Press repeatedly to fl ip dual line projection image
by 180 degrees.
NOTE
If projection is illuminated, do not look directly
into the projector.
RMR329P_M_EN_R1.indd 5
6/21/07 12:45:27 PM
