6
EN
To toggle alarms ON / OFF:
1. Press to display alarm time.
2. Press again to turn alarm ON / OFF.
To silence the alarm:
• Touch
SNOOZE / LIGHT
to silence it for 8 minutes
OR
• Press any other key to turn the alarm off and
activate it again after 24 hours.
TEMPERATURE
To toggle temperature unit:
•
Press
°C / °F
.
To toggle between outdoor / indoor sensor
readings:
•
Press
TEMP
.
/
indicates indoor and
outdoor temperature.
To auto toggle indoor / outdoor temperature displays:
•
Press and hold
TEMP
.
To deactivate auto toggle function, press
TEMP
.
PROJECTION
NOTE
For continuous projection, install adapter.
To activate / deactivate continuous projection
(when adapter is connected):
•
Slide
PROJECTION
switch to ON / OFF.
Image can still be projected when no adapter is
connected. However, when the battery power is low /
exhausted, the projection feature will be disabled.
To project image briefly:
•
Touch
SNOOZE / LIGHT
.
To flip projected image by 180º:
•
Touch
SNOOZE / LIGHT
.
To adjust location of projected image:
•
Swivel the projection arm as required.
NOTE
If projection is illuminated, do not look directly
into the projector.
NOTE
To save battery life, the projector and backlight
will only operate continuously when adapter is
installed.
BACKLIGHT
NOTE
Install adapter to use backlight function. When
the adapter is not connected, the backlight feature will
be disabled.
