GB
SWITCHING BETWEEN OPERATION MODES
Press
MODE
to switch between the five operation modes: real-time clock,
alarm clock, user profile, SMART TRAINING PROGRAM, and stopwatch.
The modes are described in the sections that follow.
You can run the SMART TRAINING PROGRAM or stopwatch in the
background as you access other modes. The icon for the mode that is
running will flash until you switch back to that mode.
CHANGING THE SETTINGS
To change the any watch setting (such as time, alarm clock, user profile, etc.)
1.
Press
MODE
to switch to the desired mode.
2.
Press and hold
SET
until the first setting for that mode flashes.
3.
Press
ST / SP / +
to change the setting. Hold to speed through the options.
4.
Repeat Steps 2 – 3 to change other settings for that mode.
USING THE CLOCK
USING THE REAL-TIME CLOCK
The real-time clock is the default display for the VIBRA-TRAINER /
VIBRA-TRAINER PRO watch, and tracks the time, date, month, and
day of week. The clock is programmed with a 50-year auto-calendar,
which means you do not need to reset the days of the week and dates
each month.
Refer to the “Changing the Settings” section to set the real-time clock.
USING THE ALARM CLOCK
To activate the alarm, press
SET
while the alarm time is displayed. The
alarm
icon will display whenever the alarm is set. When the feature is activated, a beep
will sound at the designated time each day. Press any button to stop the alarm. It
will ring at the same time the next day unless you turn the feature off.
6
SE121/132_Eng
3/19/03, 11:29 AM
Page 7
Adobe PageMaker 6.5C/PPC
