EN
6
INITIAL PROGRAMMING
Before using this telephone, the following initial
settings must be completed.
LANGUAGE SETTING
To set the language:
1.
Press
MENU/OK
to enter the options menu.
2.
Scroll or until you see “LANGUAGE”.
3.
Press
MENU/OK
to enter settings.
4.
Press or to select the desired
language (English, Spanish or French). The
default language is English.
5.
Press
MENU/OK
to confirm.
°C (104 °F) or higher, the base unit will display
“HI”. When the outdoor temperature falls below
-20 °C, the base unit will display ‘LO”.
HANDSET NAME
You can use up to 16 characters to name a
handset. The name will appear in the handset
display screen while in standby mode.
To name your handset:
1.
Press the
MENU/OK
key.
2.
Press or to select “HANDSET
NAME”.
3.
Press
MENU/OK
to begin settings, “NAME”
will appear on the handset display.
4.
Enter a name for your handset. (Please refer
to the STORING A NAME/NUMBER IN THE
DIRECTORY section for details about how to
input characters).
5.
Press
MENU/OK
to save the name.
DIAL MODE
This phone is compatible with pulse-dialing (rotary)
and tone-dialing (DTMF) systems. If your have
touch-tone service, do nothing as your phone has
been set to DTMF by default prior to shipment. If
you do not know which type of service you have,
contact your local telephone company.
To set the dial mode:
1.
Press the
MENU/OK
key.
2.
Press or to select “DIALING” from
the options.
3.
Press the
MENU/OK
key.
4.
Press or to select “DIAL METHOD”
from the submenu.
5.
Press
MENU/OK
.
6.
Press or to select “PULSE” or
“DTMF” mode.
7.
Press
MENU/OK
to confirm your selection.
To return to standby mode, press
C/MUTE
repeatedly.
FLASH TIME
Consult with your telephone company before
changing the flash time setting. Changing this
setting may cause your telephone company
service (such as call waiting) to not work properly.
To select flash time:
1.
Press the
MENU/OK
key.
2.
Press or to select “DIALING” from
the options.
3.
Press the
MENU/OK
key.
4.
Press or to select “FLASH TIME”
from the submenu.
5.
Press
MENU/OK
.
6.
Press or to select “LONG” or
“SHORT”. (The default setting is LONG).
7.
Press
MENU/OK
to confirm your selection.
KEY LOCK
You can lock the keypad to prevent keys from
accidentally being pressed.
To lock the keypad:
1.
Press
MENU/OK
.
2.
Press or to scroll to “KEY LOCK”.
3.
Press
MENU/OK
to enter the “KEY LOCK”
submenu.
4.
Press or to select “ON”.
5.
Press
MENU/OK
to confirm settings. (The
default setting is OFF).
To unlock the keypad, press 1, 5, and 9 to unlock
the keypad. (The key lock is disabled in the event
of an incoming call, but returns to key lock when
TW339 manual_Eng 6.p65
3/9/05, 4:21 PM
9
