You can tap
at any time for the
Information
page to review
the
Product Tour
.
SLEEP TRACKER
With the sleep tracking feature and vibration detection by your mobile device, the
application can monitor your sleep status for analysis and improvement of your
sleep quality.
Your mobile device will need to charge the whole night. Please place the mobile
device face down beside your pillow, where it can detect your movements. For more
details, please browse the product tour of the application.
DEREGISTER FROM THE APPLICATION
You must deregister the current main unit from the application before registering another one.
To disconnect from your current application, follow the steps below:
1. Tap
icon.
2. Tap
Forget ID
.
3. Tap
RESET
to erase the current ID memory in the application and the connection will be
interrupted immediately.
TROUBLESHOOTING
Problem
Possible
cause
Solutions/Remarks
The main unit does not work.
Power supply
Ensure plug has been firmly plugged into the
wall socket, not controlled by wall switch.
Ensure there is no power failure.
The main unit does not work.
Normal use
Press
RESET
at the rear of the main unit.
Check the connection with the mobile device.
When setting functions, the
unit does not respond.
Normal use
Connect the power adapter again or press
RESET
at the rear of the main unit.
The appliance will then be reset to factory
default settings.
No sound when the alarm
goes on.
Alarm function
disabled
Ensure alarm icon is displayed on display
screen. If
OFF
is displayed, press
ALARM
to
enable.
Alarm did not activate today,
but it did yesterday
Alarm function
disabled
Ensure you select the correct alarm time
format,
AM
/
PM
.
Check the power connection for the possibility
of a power failure.
