EN
22
b)
Clean filters
• First remove the dustbin (18) from the handheld vacuum and empty.
•
Remove HEPA filter (22), pre-filter (21) and mesh filter (20) in sequence, and wash them under
running water.
Allow all filters to air dry completely before replacing them in the vacuum to prevent liquid
from being drawn into electric parts.
c) Clean brush rollers
When cleaning brush rollers (14, 15), be sure to not cut anything other than hair, string,
fibres, or other debris.
•
First turn off power and disconnect the floor nozzle (7) from the wand (5).
1. Use a coin or key to twist anticlockwise the brush roller release switch to unlock the lid.
2. Remove the lid and lift out the soft brush roller (14) by the tab on the right side.
3.
Clean off any string, carpet fibres, or hair that may be wrapped around the soft brush roller (14),
and remove debris from the brush roller housing.
4. Wash the soft brush roller (14) as needed, using only water.
5. Air-dry completely for at least 24 hours before reinstalling.
6.
Reinstall the soft brush roller (14) and close the brush roller housing by fixing the lid on the
floor nozzle (7).
Summary of Contents for B08
Page 2: ......
Page 7: ...DE 5 3 Bedienelemente...
