ORGAPACK OR 4000.16 / OR 4500.13
2.
1.
3.
09/07
Page 3 of 3
4.
5.
Operating
Fig. 1
– Slide seal from the front into the tool
up to the stop with the opening of the
seal facing outwards.
Fig. 2
Place the strap around the package.
–
– Press lever down to the stop. Insert
strap into seal, under cutter and
clamp plate. Release lever.
Fig. 3
Pull strap from dispenser and lead
–
around package. Insert strap into
seal, cutter and windlass.
Move the letter backwards and for-
–
wards until desired strap tension is
reached.
Fig. 4
– Press button at the rear of the leve
r.
Do not hold button
.
– Use a little force (approx. 35 lbs/
150 N) to move lever backwards
forwards until seal is completely
closed. More force cannot obtain a
better closing but it can damage the
tool.
Fig. 5
– Press lever down to the stop. Do
not hold button at the rear of leve
r.
Turn tool away from the seal.
Maintenance note
Periodically lubricate all moving parts
with one or two drops of light machine oil.
