14
Attention
1.
The hard drive is precision device, please refer to operation manual in advance and
correctly operate it.
2.
Please do not disassemble or repair this product by yourself.
3.
Please do not puncture or crush this product and keep it away from high and low
temperature, damp and dusty conditions.
4.
You will need to initialize the hard drive to work properly if you are using a new hard
drive.
R
emove the Device
Attention: Do not forcibly remove the hard drive enclosure and disks to avoid data
damage or loss.
1.
Remove devices from Windows
To stop using the device, click the “safely remove hardware and media” button in the
lower right corner of the taskbar, and then click the device to be removed. When the
system prompts “safely remove hardware”, that means the device has been
successfully removed from the system and It can be unplug from the computer.
2.
Remove devices from Mac OS
To stop using the device, select the device, and move it to the trash bin.
Hard
-
drive Format Partition Operation
You need to initialize and format the partition first, otherwise it won’t work properly. If it
is a brand-new hard drive, please initialize and format the partition according to the
following steps:
1.
Please ensure the ORICO enclosure is installed properly and connected to the
computer.
2.
Right click
“My Computer”
, then select
“Computer Management”
, tap or click
“Disk Management”
on the left side of the window when
“Computer
Management”
opens, then select
“MBR”
or
“GPT”
partition form and click
“OK”
.
