background image

32

Express Warranty (Australia)

Express Warranty (Australia)

This Express Warranty is provided by Oricom International Pty Ltd ABN 46 

086 116 369, Unit 1, 4 Sovereign Place, South Windsor NSW 2756, herein 

after referred to as “Oricom”.
Oricom products come with guarantees that cannot be excluded under the 

Australian Consumer Law. You are entitled to a replacement or refund for a 

major failure and compensation for any other reasonably foreseeable loss 

or damage. You are also entitled to have the goods repaired or replaced if 

the goods fail to be of acceptable quality and the failure does not amount 

to a major failure. Oricom warrants that the product is free from defects 

in materials or workmanship during the Express Warranty Period. This 

Express Warranty does not extend to any product from which the serial 

number has been removed or was purchased outside of Australia.
Nothing in this Express Warranty excludes, restricts or modifies any 

condition, warranty, guarantee, implied term, right or remedy pursuant to 

the Australian Consumer Law and which may not be so excluded, restricted 

or modified. For such conditions, terms, guarantees and warranties that 

cannot be excluded, restricted or modified, Oricom limits the remedies 

available to extent permitted in the relevant legislation.
The Express Warranty Period will be 5 years from the date of purchase 

of the product evidenced by your dated sales receipt. You are required to 

provide proof of purchase as a condition of receiving Express Warranty 

services.
You are entitled to a replacement product or repair of the product at our 

discretion according to the terms and conditions of this document if 

your product is found to be faulty within the Express Warranty Period. 

This Express Warranty extends to the original purchaser only and is not 

transferable.
Products distributed by Oricom are manufactured using new materials or 

new and used materials equivalent to new in performance and reliability. 

Spare parts may be new or equivalent to new. Spare parts are warranted 

to be free from defects in material or workmanship for thirty (30) days or 

for the remainder of the Express Warranty Period of the Oricom branded 

Summary of Contents for DTX4000




































Reviews: