12
Operations
Scanning
The Scan feature allows you to search for active channels automatically.
There are 4 scanning modes;
Open Scan, Priority Scan, Memory Group Scan and Group tone Scan
(a special case of Memory Group Scan).
Open Scan
Press and scanning starts. The OS-SC sub menu display appears on
the LCD.
To stop Scanning, press button or PTT press.
When a signal is found, scanning will stop at that
channel to allow the signal to be heard, then resume
scanning when the channel is clear again.
The scan resume time can be set as an optional pause of P5 (default).
ch 1-2-3-4-5-6-7 ….. 77-78-79-80
Priority Scan
Priority Scan scans for activity, but in addition, it also inserts your
Priority channel into the scan sequence.
This means that your Priority Channel will be monitored
regularly while scanning to ensure that no calls are
missed. Any signal received on your Priority Channel
will take precedence over any signals received on the
other channels.
ch 1-2-3-4-5- PRI CH - 6-7-8-9-10- PRI CH ….. 76-77-78-79-80
Press and hold for 2 seconds and scanning starts.
The PS-SC sub menu display will appear on the LCD.
To stop Priority Scan, press and hold button or press PTT.
