13
Operations
Group Memory Scan
Memory scan must be stored to the memory channels in groups I to III.
Refer to memory recall function.
1. Press button to change the setting between I,II,III and I blinking in
I II III.
The I II III means all memory groups will be selected for scanning.
2. Press button to start group scan.
The ME-SC sub menu display
appears on the LCD.
3. To stop Group memory Scan,
press button or press
PTT.
Group Tone Scan
Group Tone Scan is a scan mode which allows continual communication
across congested channels.
Group Tone Scan channels are stored into Group memory scan and
only opens the squelch for signals with the correct sub code (38CTCSS
or 104 DCS tone).
To achieve this, all radios in your group memory must have the same
channels in I II III memory (group memory channels) and use the same
Subcode (CTCSS or DCS).
1. Press button to change the setting between I II III and I blinking in
I II III.
The I II III means all groups will be included in the scan.
2. Press button for 2 seconds to start group scan.
The GT-SC sub menu display
appears on the LCD.
3. To Stop Group Tone Scan,
press button or press PTT.
