14
Operations
Memory Recall
This feature allows the user to recall the stored channels in the memory.
To access channels in the Memory, simply press the "MR" button, and
the "I" will appear at the right side on the LCD. Press the memory button
you want to access from I to III Group.
To select memory channel
1. press
button repeatedly until I is flashing.
2. push channel selector knob to select channel
operation rotate channel selector knob to select
memory location, Group indicator will flash to
indicate which group is selected.
The DTX4300 has 48 stored channels as below.
CH/Group Group I Group II Group III
0
9
25
–
1
10
26
–
2
11
27
–
3
–
–
–
4
–
–
–
5
–
–
–
6
–
–
–
7
–
–
–
8
–
–
–
9
–
–
–
A
–
–
–
B
–
–
–
C
–
–
–
D
–
–
–
E
–
–
–
F
–
–
–
Each memory channel can be programmed with any CTCSS or DCS sub
code.
To change group selected in
all scan mode, press to
change between I II III.
1. Press button to change
the setting between I
flashing in I II III.
2. Press channel selector to
CH mode Select the channel
by rotating the channel dial
up or channel down to 0 - F.
More than F selected and
automatically change of
display from I blinking to
II blinking.
It is change of start band in
All scan mode(I II III).
