15
Operations
Memory Write
Select the channel you want to store.
For this example we want to save channel 09 to II
group and group channel 8.
1. Press button for 2 seconds. Group I location 1
will blink.
2. Press button to change to group II.
3. Press channel selector to change to CH mode.
4. Rotate channel selector until location 8 is selected.
5. Press button for 2 seconds to save & exit from memory write.
Remove Memory in Scanning
While the radio stops scanning on a busy channel,
press and hold button for 2 seconds.
Channel will be removed from current scanning. The
removed channel will be reinstated after the scan is
stopped and restarted.
Scan 1-
2
-3-4-5-6-7 ….. 77-78-79-80
RM Scan
1-3-4-5-6-7 ….. 77-78-79-80
Note: Up to 10 channels can be removed for the current scan.
For this example we are removing CH02 during the scan. Because it is
only noise.
1. Press button for 2 seconds.
2. Scanning will resume.
3. Channel 02 is removed during scan.
