17
Operation
Call alert
Your radio can alert you to incoming signal by emitting an audible
call tone.
Call-Ring tone
You can send a Call-ring tone to other radio users to give
an alert that you want to communicate with them.
Press the CALL button
You will hear a ring tone for about two seconds; “
TX
” icon
appears on the LCD screen. Any other units within the
transmitting range and tuned to the same channel and sub-
channel (if applicable) will hear the Call-ring tone.
Selecting a Call- Ring tone
Your PMR1200 is equipped with 10 different types of Call-Ring
tones.
a. Press the
MENU
button 8 times, the “
C A
” icon will
display and flash on the LCD Screen.
b. Press the
UP
or
DOWN
button to select the desired Call-
ring tone. A respective Call- Ring tone sound will be
played when changing from one tone to another.
c. Press the
PTT
button to confirm your setting.
Setting the Roger Beep
The Roger beep is a tone which is automatically transmitted
whenever the PTT button is released. This alerts the receiving party
to inform you that you have intentionally ended the transmission,
and you are now in receive mode.
a. Press the
MENU
button 9 times, the “
ON
” icon will flash
on the LCD Screen.
b. Press the
UP
or
DOWN
button to select the Roger beep
On/Off.
c. Press the
PTT
button to confirm your setting.
Summary of Contents for PMR1200
Page 1: ...Operating Instructions PMR1200 40 Channel UHF 2 Way Citizen Band Radio...
Page 2: ......
Page 27: ......