19
Operation
http://www.oricom.com.au/support/repeater or visit
http://www.tropinet.com/uhf-repeaters/
For example, if you wish to access a repeater station in your area
which operates on channel 2 you only need to set the Duplex
access on this Channel.
So, if you are in the range of a local repeater which transmits on
channel 2, after setting your radio to allow access of the repeater
on that channel, you will select channel 2 as normal, but during
transmit operation your radio will automatically transmit to the
repeater on channel 32.
Turning on/off Duplex on channels
a. Select the required channel to suit the repeater station you
wish to access (Channels 1 – 8 only)
b. Press the Menu button twice, “RPT” icon will display
c. Press the UP or DOWN button to set the Duplex function to On
or Off.
d. Press the PTT button to confirm your setting.
e. The RPT icon will display to indicate that Duplex is set on that
channel.
Receive Channel
1
2
3
4
5* 6
7
8
Transmit channel
31 32
33 34 35* 36 37 38
* Channel 5 is emergency channel only
Channel 2
Channel 32
Channel 2
Channel 32
Repeater Station
Summary of Contents for PMR1200
Page 1: ...Operating Instructions PMR1200 40 Channel UHF 2 Way Citizen Band Radio...
Page 2: ......
Page 27: ......