background image

24

Warranty information (Australia)

Oricom makes no other warranties or conditions, express or implied, 
including as to merchantability and fitness for a particular purpose, 
except as stated in this Warranty. Any implied warranties that may be 
imposed by law are limited in duration to the Warranty Period. 
Oricom warrants that the product is free from defects in materials or 
workmanship during the Warranty Period. This Warranty in no way 
affects your statutory warranty rights under the Trade Practices Act 
1974 or any other similar legislation. This Warranty does not extend 
to any product from which the serial number has been removed, was 
purchased outside of Australia or that has been damaged or rendered 
defective:
1.   as a result of lightning, over voltage, accident, misuse, abuse or 

other external causes;

2.  the operation outside the normal use of the product;
3.  by the use of parts not manufactured or sold by Oricom; or
4.  by modification or service by anyone other than:
 

(a) Oricom; or (b) an Oricom authorised service provider.

The Warranty Period will be 36 months from the date of purchase of 
the product evidenced by your dated sales receipt. You are required to 
provide proof of purchase as a condition of receiving warranty services. 
You are entitled to a replacement or repair according to the terms and 
conditions of this document if your product is found to be faulty within 
the Warranty Period. This Warranty extends to the original purchaser 
only and is not transferable. 
Batteries (if supplied) with this product are covered under this warranty 
for a period of 90 days. Oricom products are manufactured using new 
materials or new and used materials equivalent to new in performance 
and reliability. Spare parts may be new or equivalent to new. Spare 
parts are warranted to be free from defects in material or workmanship 
for thirty (30) days or for the remainder of the Warranty Period of the 
Oricom branded product in which they are installed, whichever is longer.
During the Warranty Period, Oricom will replace and where possible 

Summary of Contents for PMR1200





























Reviews: