12
Operation
Turning the unit ON/OFF
The power on/off is controlled by a rotational knob, use the knob
the turn the unit on or off.
Adjusting Speaker Volume
The volume is controlled by the rotational knob, rotate the knob to
adjust the volume up and down.
Receiving a Signal
The unit is continuously in the RECEIVE mode when the unit is
switched ON and not transmitting.
Note: In order for other people to receive your transmission,
they must also be on the same channel and have set the
same CTCSS code.
Transmitting a Signal
1. Press and hold the PTT button to TRANSMIT. The TX symbol is
displayed.
2. Hold the unit in a vertical position with the MICROPHONE
10cm from the mouth and speak into the microphone.
3. Release the
PTT
button when you want to stop transmitting.
Note: To check the channel activity use the monitor function.
The maximum transmitting time is limited to 1 minute.
Release and press PTT button to restart transmitting.