15
Operation
Note: Any radio set on the same channel can receive and listen
to the conversation, also when the other use a CTCSS code.
To disable CTCSS code, set the code to ‘0’.
Channel 5 and 35 are used for emergency channels.
Interference Eliminator Code will not operate on these two
channels.
Monitor
You can use the monitor feature to check for weaker signals in the
current channel.
1. Press and hold the
button to activate channel monitoring.
2. Release the
button to stop monitoring.
Room/baby function
One of the units can be set as Room/baby. The radio will transmit
a signal when it is activated by the crying baby or another sound in
the room (VOX).
The radio will no longer be able to receive signals to avoid that your
baby is disturbed during his sleep.
The other radio must be set to the same channel and CTCSS code
to receive the signal from the Room/Baby Monitor.
Note: In Room/Baby Monitor mode, different functions are
disabled (accept Button Lock, Menu and On/Off function). Only
when the Baby Monitor mode is disabled, all functions can be
used again.
To set the radio as the Room/Baby Monitor:
1. Press the
menu
button until the BABY icon appears, the
current Baby Vox setting flashes on the display and the BABY
icon is displayed.
2. Press the
button to turn the Room/Baby MONITOR function
ON. Use the
button and the
button to select the VOX
sensitivity level (1 to 3) which displayed.
3. Press the
PTT
button to confirm and return to stand-by mode
