9
Getting Started
Pack Contents
2 x Handheld Radios
2 x Battery Packs
1 dual charger
1 power adaptor
Installing/Removing the Belt Clip
1. To install the belt clip,
align the pin with the hole
in the backside. Gently
push until it clicks into
position.
2. To remove the belt clip
from the unit, push the
belt clip, while pulling the
clip away from the unit.
Battery Installation
1. Remove the belt clip
2. Pull the battery cover tab
and gently remove the
battery cover.
3. Install the rechargeable
battery pack ( KEBT-079-
1, LH060-3A44C3BT)
following the polarity as shown. The metal contacts should
face outwards from the radio to connect on the battery door.
Or install 3 ‘AAA’ alkaline (not supplied) following the polarity
as shown.
4. Re-install the Battery Cover and Belt Clip
WARNING
Do not disassemble the battery pack.